Load on module failed - no memory - FireWall-1 Gurus Forum

mhenchey · Status: Offline

Load on module failed - no memory

ccseng2002 · Status: Offline

make sure SIC is working between your Nokia boxes between your Mangement Server and the enforcement modules

mhenchey · Status: Offline

The SIC has Trust State: trust established.

ccseng2002 · Status: Offline

this is what I would do:

0) Make sure you are running ipso version 3.7.1 build 004 on both Nokia boxes and have VRRP running properly,

1) run cpconfig on both the nokia and re-SIC,

2) make sure the licence on both the Nokia boxes are correct. I would use eval license since I know it always works,

3) perform a "cprestart" on the Nokia boxes. Make sure that the firewall daemon is up and running on both boxes,

4) perform a "fw unloadlocal" on both nokia boxes.

5) re-establish SIC between the Management Server and the Nokia boxes. Test your SIC and make sure they do communicate. Create an gateway cluster and add these Nokia boxes into that gateway cluster.

7) have a simple ruleset. Allow any any accept.

8) Push the policy.

If all else fail, open a NOKIA TAC case.

raulico · Status: Offline

nokia, about this problem pubblished this:

Resolution 13340

and it says to check firewall object on gui

ciao

Raoul

maqing · Status: Offline

1.check license
2.check nokia box's ip that defined by smartcenter

mhenchey · Status: Offline

Here is what we found out. Under Smart Defense, Application Intelligence, WEB uncheck General HTTP Worm catcher, and then Install the policy, go back to Smart Defense and then enable the Worm Catcher, and then reinstall the policy.